When somebody forgets to punch

People forget. The rule MekongHRM applies is narrow on purpose:

  • A stretch with one punch is Miss scan. Something is known about it, but not enough to count the hours.
  • A stretch with no punches is Absent.

MekongHRM never guesses the missing time. A system that quietly filled in "probably 17:00" would be producing a number nobody checked, on a record that decides what somebody is paid.

On a two-stretch shift a forgotten punch costs one stretch — half a day on the usual setting — rather than the whole day. That is the reason to choose that shape. What a stretch is worth comes from the shift's Day value; see Shifts with one or two stretches.

Before you start

  • The attendance.view permission to see the month, and attendance.edit to correct it.

Steps

  1. Open Attendance and look for cells marked !.
  2. The employee files a correction from Telegram for the exact punch that is missing. It goes to their approver like any other request. The form lists the recent days that still have a punch missing, each punch with its own box, so they tick it rather than search for the day. Everything ticked on one day is one request: forgetting to scan out at lunch and back in is one card for the approver, not two.
  3. Once it is approved, the time is recorded and the day is recalculated straight away.

The bot reminds them on the evening it happened, the following morning, and again before the month is closed.

What you should see

The cell changes from ! to a complete day, and the days-worked figure at the end of the row goes up.

The corrected time is marked as a correction rather than as a recorded punch, so it is always clear afterwards which times somebody actually punched and which were put right later.

Taking an unresolved miss scan from annual leave

A missing punch nobody resolves is taken from annual leave after a few days, and so is a stretch with no punch at all — an absence nobody explained with a miss scan or a leave request — from 1 November 2026 on; an absence before then stays unpaid absence, and HR adjusts the balance by hand if it should come from leave. Leave approved for that stretch afterwards gives the day back, as an approved miss scan does. This is on for every company unless it is turned off; turned off, a missing punch waits until the month is closed, and one still unresolved then counts as unpaid absence.

  1. Open Settings → Attendance and find Take unresolved missing punches and absences from annual leave.
  2. Take them from annual leave is ticked; untick it to go back to waiting for the close.
  3. Set how long to wait, in After … days: 3 days unless you change it, anything from 1 to 31.
  4. Set the time of day the days run out, in At: 07:00 unless you change it, in the branch's time zone. With 2 days at 07:00, a punch missing on 5 November is taken at 07:00 on 7 November, and the employee can file a miss scan until 06:59 that morning.
  5. Press Save at the bottom of the section.

When it is on, a stretch is taken from annual leave in two cases:

  • It is still marked Miss scan that many days after its date, with no approved miss scan.
  • Its miss scan was rejected. Then it is taken at once, without waiting for the days to pass.

What is taken is the stretch's day value, as one line on the employee's leave ledger: Missing punch not resolved. If the balance does not cover it, the rest counts as unpaid absence. Each stretch is taken once, however many times the check runs.

The employee gets a Telegram message in their own language saying what was taken. The same number of days is also the employee's deadline for filing a miss scan themselves: from the day the stretch is taken, the Mini App no longer offers that day, and a miss scan filed for it is refused. HR can still file one on their behalf until the attendance period is locked, for a good reason such as a broken machine or a trip. If it is approved, exactly what was taken comes back as a line of its own, Returned: miss scan approved, and any unpaid part is removed. A miss scan that was rejected is taken at once, and the employee can file again while the day is still inside the deadline.

Meanwhile the grid still shows the stretch as Miss scan: the punch is still missing, only the cost has been settled. A period that is already locked is never touched.

The check runs every hour. In a demo company, Fast forward runs it too.

If something goes wrong

The count of miss scans is still there when you come to close the month. The lock screen shows how many are left and what closing will do to them. See Closing the month.

A punch was recorded but the stretch still says a punch is missing. The punch may have fallen outside the hours that stretch accepts. A stretch takes punches from a window either side of itself, and one far outside it is kept and flagged rather than counted — look for a day marked as having a punch that matched nothing.

Annual leave went down although nobody asked for leave. Look on the leave ledger for a Missing punch not resolved line. The company takes unresolved missing punches from annual leave; a miss scan approved before the lock gives the day back.

Somebody punched twice by accident. Every punch counts by default, so two in a row are read as two: an end and a start. A company whose devices often record one scan twice can switch on Ignore double punches under Settings → Attendance and choose the minutes: a punch closer than that to the one before is then taken as the same one. Changing it reads every day of an open period again.

Somebody never punches at all, by arrangement. Owners and senior managers can be marked as not required to check in. They are counted as present and the bot never chases them.

Last checked 05/11/2026